Torque Seal That Performs—Without The Toxic Tradeoffs
Most torque seal products were designed decades ago. Metron re-engineered the formula for modern performance, safety, and compliance.
Metron Marker Torque Seal delivers precise, highly visible torque marking and tamper detection—without the solvents, fumes, or environmental compromises of traditional products.
Our non-toxic, water based formula is a premium, modern, and safer formulation. Makes warranty inspections faster and easier by providing a clear visual indication of loosening, movement, or tampering on nuts, bolts, fasteners, fittings, and assemblies.
Engineered for aerospace, electronics, and medical environments, it’s the cleaner, safer evolution of torque marking.
Precision Matters In Torque Marking
Especially in assemblies where space is limited and accuracy is critical. Metron’s precise applicator is engineered to deliver controlled flow exactly where it’s needed, eliminating the splatter and over-application common with traditional squeeze tubes or fiber tips.
This level of control produces sharper, more consistent marks while reducing material waste and cleanup time. The outcome is a cleaner workflow overall, with faster inspections and more reliable results at every stage.
Metron Marker Torque Seal uses bright fluorescent,
UV-enhanced colors to ensure markings stand out clearly under a range of lighting conditions.
Use Cases
Torque striping for critical fasteners
Tamper evidence in regulated environments
Vibration detection in sensitive assemblies
Data centers & electronics
准备好尝试了吗？
申请指南
用作防拆封条：
- 确定接触点（例如螺栓顶部）
- 涂抹墨水以覆盖接触区域
- 使其完全干燥
- 任何对密封的破坏都表明存在篡改
用作扭矩标记：
- 环境温度（暖空气下更快）确保零件已正确固定
- 如果需要，清洁应用区域以获得最佳附着力
- 在相邻部件上涂抹墨水以形成连续条纹
- 在环境温度下干燥（暖空气可以加快干燥）
- 检查期间，条纹断裂表示松动或篡改
技术规格
干燥时间
干燥速度取决于大气条件和标记尺寸——在温暖干燥空气中的小标记比在潮湿环境中的大标记固化得更快。
应用温度
-20°F 至 500°F
可用颜色
多种标准和荧光选项，包括在紫外线下会发出荧光的隐形墨水。
行业
广泛应用于航空航天、医疗、电子、数据中心及其他精密驱动领域。
外观
乳霜状液体（多种颜色）
闪点
不易燃
阻力
大多数颜色在高达 200 °C 的温度下不会变色。在更高的温度下，颜色可能会褪色，但标记仍然可见。
保质期
3-12个月 *可通过在硬化前加水延长*
兼容性
适用于大多数金属、玻璃、塑料和纺织品——不染色，不易燃
环境安全
挥发性有机化合物 <50 克/升
